You have no items in your quote.
Raven Application Controls
As the most precise nozzle control system, Hawkeye 2 ensures accurate droplet coverage up to 2.5 times more accurate out of the tip than comparable systems. It provides consistency across the boom, ensuring precise droplet coverage, optimizing input costs. Raven's legacy of preformance and support means less downtime and more acres covered each day.
This next generation nozzle control valve (NCV) builds upon the previous system: individual nozzle control reduces skips and overlaps; consistent droplet rate and size reduces drift and increases application quality; and turn compensation minimizes over and under application, achieving the ideal application rate across the boom.
Raven's Hawkeye 2's scalable platform will set up your operation for years of success.
This pressure-based product control system allows for precise sprayer application in a variety of conditions, reducing spray drift and getting the most out of every nozzle. Each nozzle is controlled by its own individual pulsing valve giving you a consistent spray pattern as speed and conditions change.
Built on the ISOBUS communication platform allows the Hawkeye System to work with ISO Task Controllers, including the Viper 4+. Hawkeye has been tested for shock, vibration, impact, and weather resistance in rugged terrain and extreme temperatures. It's durability is unparalled and ultra-precise.
Boom Recirculation uses add-on hardware to aid in efficient clean out of the boom and plumbing system. By circulating liquid from the outside tip of the boom and back to the center section, product settling is reduced and waste is eliminated.
Boom Prime prepares each individual nozzle, beginning on the outside of the boom. Nozzles are opened in timed sections, each one purging remaining chemical before moving down to the next section on the boom until boom priming is complete.
Through boom priming and boom recirculation, you can optimize the use of chemicals, eliminating waste and protecting the environment.
By activating Boom Prime on your machine with a simple software upgrade, it seamlessly integrates with Hawkeye, no additional rate controller or display required.
With a simplified setup, integrated help content, and added advancement diagnostic information, this user friendly interface quickly identifies issues and reduces costly downtime. The RCM is compatible with many ISOBUS virtual terminals on the market, including the Viper 4+, CR7 and CR12.
RCM is the ultimate advancement in precision and efficiency, and the next solution for your operation's success.
The entire system is simple and pays off with greater precision, higher yields and unrivaled efficiency. The Sidekick Pro direct inject systems will help you save time and money on applications of herbicides, insecticides, drift agents and nitrogen stabilizers.
Both models use super cooling technology to stabilize NH3 as a liquid for superior accuracy and control. Paired with your Raven control system, AccuFlow Vortex super cooling NH3 technology replaces the dual cooler system to give you superior accuracy and control over your applications for higher yields, less waste and lower input costs.
Now available in stainless steel and with more capacity options!
Accuflow & Accuflow HP
| AccuFlow Vortex 1" Valve | AccuFlow Vortex 1-1/2" Valve | AccuFlow HP Plus with Vortex Cooler | |
|---|---|---|---|
| Capacity Range* | 3-30+ GPM | 3-50 GPM | 3-80 GPM |
| Weight | 190 lbs | 196 lbs | 280 lbs |
| Tractor Hydraulic Requirement | -- | -- | 12 GPM @ 2,000 PSI |
| System Working Pressure | |||
| Cooler Relief Valve Setting | |||
| Temperature Range | |||
| Strainer Screen | |||
| Fast Valve Open/Close Time | |||
| System Voltage | |||
*Systems were tested at 40°F and 60 tank PSI (Fall conditions).
You can easily replace your Raven SCS 440, 450, or 4400 spray console with Switch Pro and pair it with any Envizio Pro series field computers, Viper Pro, or Viper 4 field computer. With the Switch Pro, you will have on-off-section control, adjustable 0-100 percent coverage control and a manual override function for greater savings and productivity.
The Raven ISOBUS single product control node is designed to add liquid or granular speed compensated product control capabilities to ISOBUS virtual terminals. Adding the Raven ISOBUS product control node allows machine operators to monitor and control the Raven product control system directly from a virtual terminal display.
Whether you start small or are looking for a spray console with more performance capability, you are sure to find it, and when you are ready for the next step, Raven has a multi-function field computer and a simple way to help you make the transition with Raven's Switch Pro control console.
SCS Control Consoles
| Spray Console | Product Capability | Product Forms | Direct Injection | Boom Control Sections | Boom Switches |
|---|---|---|---|---|---|
| SCS 4400™ | 5 products: 1 hardwired, 4 via CANBUS addition |
Liquid Granular NH3 |
Sidekick Pro | 10 | Equipped with 7 switches |
| SCS 4600™ | 5 products: 1 hardwired, 4 via CANBUS addition |
Liquid Granular NH3 |
Sidekick Pro | 10 | Remote switches required |
| SCS 5000™ | 5 products: 4 CANBUS equipped |
Liquid Granular NH3 |
Sidekick Pro | 10 | Remote switches required and CAN nodes |
| SCS 440™ | 1 product | Liquid NH3 |
Sidekick | 3 | Equipped with 3 switches |
| SCS 450™ | 1 product | Liquid NH3 |
Sidekick | 6 | Equipped with 6 switches |
| SCS 460™ | 1 product | Liquid NH3 |
Sidekick | 7 | Remote switches required |
| SCS 660™ | 1 product | Liquid Granular NH3 |
Sidekick | 7 | Remote switches required |
| SCS 660M™ | 1 product | Liquid Granular NH3 Manure |
Sidekick | 7 | Equipped with master switch |
The digital display is easy to view and the controls are on the meter itself, which is right where you need it. While RFM series flow meters are used for spraying applications, the FlowMax series is designed exclusively for stationary fluid transfer, and also lets you set your own fluid transfer rate.
Raven RFM flow meters are compatible with most chemicals and liquids, and with a turn down ratio of 50:1, it makes any flow meter in the RFM series an ideal choice for most agricultural and industrial applications. With a wide variety of flow capacities and housing, turbine, shaft and bearing materials, Raven is sure to have a flow meter to match your application needs.
